NEC Univerge SV9100 Manual page 359

Issue 2.0
Program
Program Name/Description
Number
10-37-02 UPnP Setup – Retry Time
Define the retry time for UPnP.
10-54-01 License Configuration for Each Package –
License Code
Assign VoIP Resource Licenses (5103) to
GCD-CP10 slot (1).
10-67-01 SIP Stack Configuration Setup – DNS Mode
Select whether DNS mode is enabled.
10-67-02 SIP Stack Configuration Setup – DNS IP
Address
Set the IP Address of DNS Server. The SV9100
can only use one DNS Server, two SIP Carriers
requiring their own DNS Server can't be used.
10-67-03 SIP Stack Configuration Setup – DNS Port
Assign the DNS port.
10-67-04 SIP Stack Configuration Setup – DNS
Source Port
Assign the DNS source port.
10-68-01 IP Trunk Availability – Trunk Type
Assign the trunk type as (1) SIP.
10-68-02 IP Trunk Availability – Start Port
Assign the Start Port for your SIP trunks.
10-68-03 IP Trunk Availability – Number of Port
Assign the number of SIP port trunks.
11-01-01 System Numbering – Service Code
Set the system internal (Intercom) numbering
plan. The numbering plan assigns the first and
second digits dialed and affects the digits an
extension user must dial to access other
extensions and features, such as service codes
and trunk codes. If the default numbering plan
does not meet the site requirements, use this
program to tailor the system numbering to the
site.
14-01-24 Basic Trunk Data Setup – Trunk-to-Trunk
Outgoing Caller ID through Mode
Enable/Disable the ability to send the original
Caller ID through when the call is Forward
Off-Premise.
14-02-01 Analog Trunk Data setup – Signaling Type
(DP/DTMF)
Set the outgoing signaling type for the tie trunk.
SV9100 Networking Manual
Input Data
0, 60 ~ 3600
(1 ~ 59 cannot be input)
1 ~ 255 Resource Licenses
0 = Disable
1 = Enable
XXX.XXX.XXX.XXX
0 ~ 65535
0 ~ 65535
0 = None
1 = SIP
2 = H.323
3 = CCIS
(NetLink System ID 0 ~ 50)
0 ~ 400
(NetLink System ID 0 ~ 50)
0 ~ 400
(NetLink System ID 0 ~ 50)
0 = Disable (No)
1 = Enable (Yes)
0 = Dial Pulse (10 PPS)
1 = Dial Pulse (20 PPS)
2 = DTMF
Level
Default
1 2
60

0

0

0.0.0.0

53

53

0

0

0

Refer to the
Programming
Manual for
default values.

0

2
6-13
3
