NEC Univerge SV9100 Manual page 141

Program/
Description/Selection
Item No.
20-17-01 Operator Extension –
Operator Extension
Number
For Remote System
Program/
Description/Selection
Item No.
11-01-01 System Numbering
44-02-01 Dial analysis Table for ARS/
F-Route Access – Dial
44-02-02 Dial analysis Table for ARS/
F-Route Access – Service
Type
44-02-03 Dial analysis Table for ARS/
F-Route Access –
Additional Data
44-05-01 ARS/F-Route Table –Trunk
Group Number
44-05-02 ARS/F-Route Table –Delete
Digits
44-05-03 ARS/F-Route Table –
Additional Dial Number
Table
4-62
Assigned Data
Up to eight digits Define extension numbers that are used as
Default is 101. operators. Assign only in KTS-to-KTS network.
Assigned Data
Default is Refer to UNIVERGE SV9100 Programming
0 = 1 digit; F-Route Manual for all options and default settings.
Analysis Table 1 = 0 Assign access code (up to eight digits) to dial the
Attendant.
Default is No Setting.
0 = No Setting (None) Assign the service type to be used.
1 = Extension Call (Own)
2 = ARS/F-Route Table
(F-Route)
3 = Dial Extension
Analyze Table
(Option)
Default is 0
0 = No Setting Enter additional data for Service Type selected in
1 = Delete Digit = 0~255 PRG 44-02-02.
(255: Delete all digits)
2 = 0~500
3 = Dial Extension
Analyze Table
Number (0~4)
Default is 0
0-100,101-150,255 Select trunk group number for outgoing calls.
0 = Not Set
1~100 = Trunk Group
from 14-05
101~150 = Networking
255 = Extension Call
Default is 0
0 = No Setting Enter number of digits to delete from the dialed
0~255 number.
(255 = Delete all digits)
Default is 0
0~1000 Enter Table Number defined in PRG 44-06.
Default is 0
Issue 2.0
Comments
Comments
Features and Specifications