NEC Univerge SV8100 Programming Manual page 842

Issue 10.1
Input Data
Item
No.
37
38
39
40
41
42
43
44
45
46
47
2 - 806
Item
G.722 Jitter Buffer - Maximum
Set the maximum G.722 Jitter Buffer.
G.726 Audio Frame
Maximum number of G.726 Audio
Frames. G.726 assumes the audio signal
made by a specimen by 16kHz and the
frame of 10ms is assumed to be a unit to
32kbps by the encoding compressed
method.
G.726 Silence Compression (VAD)
Mode
Select whether to compress silence with
G.726. When there is silence, the RTP
packet is not sent.
G.726 Jitter Buffer - Minimum
Set the minimum value of the Jitter Buffer
of G.726 is set. Jitter is the variation in the
time between packets arriving and the
buffer allows this variation to be absorbed.
G.726 Jitter Buffer - Standard
Set the average G.726 Jitter Buffer.
G.726 Jitter Buffer - Maximum
Set the maximum G.726 Jitter Buffer.
iLBC Audio Frame
Maximum number of iLBC Audio Frames.
iLBC assumes the frame of 10ms is a unit.
iLBC Silence Compression Mode
Select whether to compress silence with
iLBC. When there is silence, the RTP
packet is not sent.
Not used by IPLB.
iLBC Jitter Buffer - Minimum
Set the minimum value of the Jitter Buffer
of iLBC is set. Jitter is the variation in the
time between packets arriving and the
buffer allows this variation to be absorbed.
iLBC Jitter Buffer - Standard
Set the average iLBC Jitter Buffer.
iLBC Jitter Buffer - Maximum
Set the maximum iLBC Jitter Buffer.
UNIVERGE SV8100
Input Data
0~255ms (Note 2)
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
0 = Disable
1 = Enable
0~255ms (Note 2)
0~255ms (Note 2)
0~255ms (Note 2)
2 = 20 ms
3 = 30 ms
4 = 40 ms
0 = Disable
1 = Enable
0~255ms (Note 2)
0~255ms (Note 2)
0~255ms (Note 2)
Program 84 : Hardware Setup for VoIP
Default
120
3
0
30
60
120
3
0
30
60
120