NEC Univerge SV8100 Programming Manual page 912

Issue 10.1
Alarm
Type Report
No.
86 0 Data base
2
replication
fail.
87 0 Data base
2
replication
fail.
88 0 NetLink
2
phase shift.
89 0 NetLink
2
phase shift.
90 0 NetLink
2
phase shift.
91 0 Primary auto-
2
integration.
92 0 Primary
2
compulsion
specification.
93 0 NetLink node
2
connection
detection.
94 0 NetLink node
2
secession
detection.
95 0 Data Base
2
replication
failure.
96 0 Data base
1
recovery fail.
97 0 DB recovery
2
operation
start.
98 0 DB recovery
2
operation
finish.
99 0 NetLink
1
Configuration
Error
2 - 876
Table 2-20 Description of Alarm (Continued)
Name Content of Alarm
Because the versions of
DB is different, replication
cannot be executed
between Primary and
Secondary.
Because the error occurred
in the communication
between Primary and
Secondary, replication
cannot be executed.
Operation began as
Primary.
Operation began as
Secondary.
It shifted to the node
search mode.
Primary auto-integration
function operated.
The Primary compulsion
specification function was
executed.
Node connection with
NetLink Primary was
detected.
Secession of the node
detected with NetKink
Primary.
Because Secondary is in
programming mode, the
replication of DB cannot be
executed.
Error happened when
DataBase recovery
operation.
Backup/Restore
Start Data base recovery
operation.
Backup/Restore/Delete
Finish DataBase recovery
operation.
Backup/Restore/Delete
This alarm occurs when
the system tries to start as
NetLink without MEMDB
Cause Action
The versions of 1. Confirm the version
data bases of data bases of
between Primary Primary and Secondary
and Secondary is using PC PRO.
different.
2. Check with maker on
uncertain points.
LAN link between Confirm LAN link
Primary and between Primary and
Secondary was Secondary.
disconnected.
Operation began as No action is necessary.
Primary.
Operation began as No action is necessary.
Secondary.
Shifted to the node No action is necessary.
search mode.
Primary auto- No action is necessary.
integration function
operated.
Primary No action is necessary.
compulsion
specification
function was
executed.
Node connection No action is necessary.
with NetLink
Primary was
detected.
Secession of the No action is necessary.
node detected with
NetKink Primary.
Logging in with Log out from secondary
Secondary in the programming mode.
Web Pro or the PC
Pro is possibility
the cause.
Lack of resource Delete unnecessary file
Memory, protected and restore open area,
area, recovery data then try operation
file corruption are again.
possible reason for
this.
Start Data base No action is necessary.
recovery operation.
Finish Data base No action is necessary.
recovery operation.
PRG51-01-01 is set Install PZ-ME50 when
without PZ-ME50. NetLink is enable.
Program 90 : Maintenance Program
UNIVERGE SV8100
Alarm
Recovery
Status
WAR
WAR
INF
INF
INF
INF
INF
INF
INF
WAR
WAR
INF
INF
WAR