NEC Univerge SV8100 Programming Manual page 187

UNIVERGE SV8100
Programming Manual
Item
Item
No.
13
Trunk-to-Trunk Transfer
Use this option to enable (1)
or disable (0) loop
supervision for the trunk.
This option is required for
Call Forwarding Off-Premise
and Tandem Trunking only.
14
Long Conversation Cutoff
Use this option to enable or
disable the Long
Conversation Cutoff feature
for each trunk.
15
Long Conversation Alarm
Before Cutoff
Use this option to enable or
disable the Long
Conversation Alarm for each
trunk.
16
Forced Release of Held
Call
Use this option to enable/
disable forced release for
calls on Hold. If enabled, the
system disconnects a call if it
is on Hold longer than a
programmed interval
(Program 24-01-05). If
disabled, forced
disconnection does not
occur. Program 24-01-01
also affects this option.
17
Trunk to Trunk Warning
Tone for Long
Conversation Alarm
Use this option to enable or
disable the Warning Tone for
Long Conversation feature
for DISA callers.
18
Warning Beep Tone
Signaling
19
Privacy Mode Toggle
Option
Use this option to enable or
disable a trunk ability to be
switched from private to non-
private mode by pressing the
line key or Privacy Release
function key.
Input Data
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
Issue 10.1
Related
Default
Program
0 (OT)
1 (AU)
0 20-21-03
20-21-04
0 20-21-01
20-21-02
0 24-01-01
24-01-05
0
0
0
2 - 151