NEC Univerge SV8100 Programming Manual page 258

Issue 10.1
Item
No.
04
05
Feature Cross Reference
None
2 - 222
Item
Show Internal Caller Information
When set to a 0, internal calls to the virtual
extension will not show the name or
number of the extension that is calling.
When set to 1, internal calls to the virtual
extension WILL show the name or number
of the extension that is calling if the virtual
is assigned to ring or if PRG 15-18-03 is
set to a 1.
One Ring
When set to a 0, the virtual extension
follows the normal ring cycle. When set to
a 1, the virtual extension will only ring one
time (the virtual extension must be first set
to ring in PRG 15-08).
Default
If a DIL rings a Virtual Extension, the Virtual Extension Key Operation Mode must

be set to 1.
Conditions
If a trunk call rings a Virtual Extension, the Virtual Extension Key Operation Mode

must be set to 1 (Land on the key), or the multiline terminal must have a CAP Key
CO Line Appearance.
UNIVERGE SV8100
Input Data Default
0 = Do not show
1 = Show
0 = Normal Ring
Cycle
1 = One Ring
Program 15 : Extension, Basic Setup
Related
Program
0 15-09-01
15-18-03
0 15-09-01
or