NEC Univerge SV8100 Programming Manual page 906

Issue 10.1
Alarm
Type Report
No.
6 0 Blocking
0
7 0 Power failure
1
8 0 RAM Backup
1
Battery Error
10 0 ISDN Link
0
Error
11 0 CTI Link Error
0
12 0 ACD MIS Link
0
Error
2 - 870
Table 2-20 Description of Alarm (Continued)
Name Content of Alarm
The link of terminals
connected with the ESI
package came off.
The supply of the
commercial power
stopped.
RAM backup battery on the
CD-CP00 blade is
unplugged or defective.
Layer1 link of ISDN lines
came off.
The link with the CTI server
came off.
The link with ACD MIS
client PC came off.
Cause Action
1.Terminal Confirm the terminal
Breakdown. connected with same
2. Faulty wiring and ESI. If they work
wiring termination. normally, confirm the
3.External noise. breakdown or the wiring
4.ESI package for the terminal.
Breakdown. Exchange the terminal
that doesn't work and
the working terminal,
and confirm it's
working. An external
factor of the noise etc.
is thought.
Please reconfirm wiring
and the installation,etc.
Please inquire of the
manufacturer when the
problem occurs after it
confirms it.
1. The power cable 1.Confirm the power
came off. supply outlet when the
2. Power failure commercial power has
3. The power not stopped.
supply broke down. 2.Please confirm with
manufacturer if the
problem occurs again.
Check the battery
connector. If it is
connected correctly,
replace the battery.
1. Check 1.Confirm the data of
Connection PRG10-03.
between main 2.Confirm wiring and
device and ISDN the installation of DSU.
line 3.Check with the
2. DSU Breakdown. manufacturer if the
3. The setting of problem occurs again.
PRG10-03 does
not correspond to
an actual line.
1. LAN cable 1. Confirm the CTI
defective. server, wiring, and the
2. Connected HUB connection.
broken. 2.Check the
3. The CTI server manufacturer if the
doesn't start problem occurs again.
normally.
1. LAN cable 1.Confirm ACD MIS
defective. client PC and
2. Connected HUB connected part.
broken. 2. Check with
3. The CTI server manufacturer if the
doesn't start problem occurs again.
normally.
Program 90 : Maintenance Program
UNIVERGE SV8100
Alarm
Recovery
Status
The error is ERR
recovered
REC
when
connecting or
exchanging it.
When the ERR
commercial
REC
power is
restored, the
error is
recovered.
The error is ERR
recovered
REC
once the
battery is
replaced.
When the ERR
connection
REC
returns
normally, the
error is
recovered.
When the ERR
connection
REC
returns
normally, the
error is
recovered.
When the ERR
connection
REC
returns
normally, the
error is
recovered.