NEC Univerge SV8100 Programming Manual page 910

Issue 10.1
Alarm
Type Report
No.
60 0 SIP
2
Registration
Error
Notification.
61 0 SIP extension
0
trouble
information.
62 0 DtermIP
0
trouble
information.
63 0 SIP-MLT
0
trouble
information.
64 0 VoIPDB LAN
1
Link Error.
65 0 VoIPDB
0
trouble
information.
2 - 874
Table 2-20 Description of Alarm (Continued)
Name Content of Alarm
1.The registration of the
SIP trunk to the SIP server
failed.
2.The registration of the
SIP trunk to the SIP server
failed in the authentication.
3.There is no response
from the SIP server to the
SIP registration request.
1. Failed registration of the
SIP extension terminal.
2. The SIP extension
terminal was not acquired:
• At Regist of the SIP
extension terminal to
SV8100.
• When you cannot acquire
the DSP resource when it
sent.
The error occurred by the
DtermIP relation.
• When the error occurs
while communicating with
VoIPU or DtermIP.
• When it becomes
impossible to do the
communication between
SV8100 and DtermIP
• When failing in the
acquisition of DSP.
1.The trouble occurred by
the SIP-MLT relation.
2. The DSP resource could
not be acquired at
incoming/outgoing.
3. The negotiation with
VoIPDB failed.
The link of LAN of VoIPDB
came off.
When DSP of VoIPDB
notifies Error.
Cause Action
1. The setting of the 1.Confirm the following
system data is system data setting --
wrong. PRG 10-12, 10-28, 10-
29, 10-30, and 10-36.
2. The setting of the 2.Confirm the setting of
router is wrong. routers.
3.Confirm whether
3.It is an error to abnormality occurs on
the link of LAN. the net side.
4.Confirm the
4. Net side trouble. authentication system
data setting.
5.Confirm wiring and
the system data setting.
Please inquire on
uncertain points of the
maker.
1. The registered 1. Confirm wiring and
port is used by the system data setting.
other extension.
2. The license is 2. Confirm whether
insufficient. each equipment such
3. DSP of VoIPDB as access points works
not acquired. normally.
1. The packet loss Confirm whether each
occurred on the equipment such as
network or the wirings and HUB is
wiring cutting normal.
occurred.
2. DSP of VoIP not
acquired.
1. The packet loss Confirm whether each
occurred on the equipment such as
network or the wirings and HUB is
wiring cutting normal.
occurred.
2. DSP of VoIP not
acquired.
1. LAN cable is 1. Confirm LAN
defective. connector and wiring.
2. Connected HUB 2. Check with maker on
broken. uncertain points.
3. Defect
CD-CP00.
PZ-32IPLA. 1. Possibility of
defective. defective hardware.
2. Check with maker on
uncertain points.
Program 90 : Maintenance Program
UNIVERGE SV8100
Alarm
Recovery
Status
The error is ERR
recovered REC
when normally
connecting it.
ERR
REC
ERR
REC
WAR
When the ERR
REC
connection
returns
normally, the
error is
recovered.
WAR