System Options For Transfer - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 24-02 : System Options for Transfer to define the system options for
the Transfer feature.
Input Data
Item
No.
01
02
03
04
05
Programming Manual
Program 24 : Hold/Transfer Setup

24-02 : System Options for Transfer

Item
Busy Transfer
Use this option to prevent or allow extensions to
Transfer calls to busy extensions. If disabled,
calls transferred to busy extensions recall
immediately.
MOH or Ringback on Transferred Calls
Use this option to enable or disable MOH on
Transfer. If enabled (0), a transferred caller
hears MOH while their call rings the destination
extension. If disabled (1), a transferred caller
hears ringback while their call rings the
destination extension.
Delayed Call Forwarding Time
If activated at an extension, Delayed Call
Forwarding occurs after this time. This also sets
how long a Transferred call waits at an
extension forwarded to Voice Mail before routing
to the called extension mailbox.
Transfer Recall Time
An unanswered transferred call recalls to the
extension that initially transferred it after this
time.
Message Wait Ring Interval Time
For Single Line Telephones (SLTs) without
message waiting lamps, this is the time between
intermittent ringing. If this value is set to 0, the
system rings once.
Input Data Default
0 = Disable 0 (OT)
1 (AU)
(No)
1 = Enable
(Yes)
0 = Hold Tone 0
1 = Ring Back
Tone
10
0~64800s
0~64800s 30
0~64800s 30
Issue 10.1
Related
Program
20-03-02
20-31-15
20-31-16
2 - 379