NEC Univerge SV8100 Programming Manual page 294

Issue 10.1
Item
2 - 258
No.
09
Group Hold Initiate
Turns off or on an extension ability to initiate a Group
Hold.
10
Group Hold Answer
Turns off or on an extension ability to pick up a call on
Group Hold.
11
Automatic On-Hook Transfer
Turns off or on an extension ability to use Automatic
On Hook Transfer.
12
Call Forwarding Off Premise (External Call
Forwarding)
Turns off or on an extension ability to set up Call
Forwarding Off-Premise for their telephone.
13
Operator Transfer After Hold Callback
Turns off or on an extension ability to have a call
which recalls from hold transfer to the operator.
14
Trunk-to-Trunk Transfer Restriction
Turns off or on the Trunk-to-Trunk Transfer
Restriction. If enabled, Trunk-to-Trunk Transfer is not
possible.
15
VRS Personal Greeting (Message Greeting)
Turns off or on a Service Code to record, listen to, or
erase the Personal Greeting Message.
16
Call Redirect
Turns off or on a multiline terminal user ability to
transfer a call to a predefined destination (such as an
operator, voice mail, or another extension) without
answering the call.
17
Department Group Trunk-to-Trunk Transfer (Each
Telephone Group Transfer)
Turns off or on an extension user ability to set
Trunk-to-Trunk Forwarding for a Department Group.
18
No Recall
No Recall set to "Allow" (1) will not stop transferred
calls from recalling from a virtual extension.
19
Hold/Extended Park
Determine if an extension Class of Service should
allow either a normal or extended Park.
20
No Callback
Turns off or on an extension to receive callbacks.
Item
UNIVERGE SV8100
Input Data
COS 01~15
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
Program 20 : System Option Setup
Default
1
1
1 (OT)
0 (AU)
0
0
0
1
0 (OT)
1 (AU)
1
0
0
0