26-05: Lcr Carrier Table - NEC Univerge SV8100 Programming Manual

Issue 10.1
Program 26 : ARS Service & Least Cost Routing
Level:
IN
Description
Use Program 26-05: LCR Carrier Table to define the LCR Access Codes and
routing options. These options include Authorisation codes and Cost Centre
Input Data
Input Data
Item
No.
Feature Cross Reference
Least Cost Routing
2 - 412
Carrier Table Number
Item
01
Delete Digits
Enter the quantity of leading digits that
need to be deleted
02
Access Code
Enter the Access Code and Option to
route to the Indirect Carrier
03
Authorisation Code Table
Enter the table number that contains the
correct Authorisation code.
04
Cost Centre Code
Optionally enter a cost centre code.
Conditions
The settings must comply with the requirements of the Indirect Carrier.
The operation of the @ symbol within the Access Code depend on the type of trunk. For
analogue trunk set as Dial Pulse the @ symbol defines change to DTMF dialling. For
ISDN trunks the @ symbol defines that a Connect Message is received and then DTMF
digits are sent in the B-Channel.

26-05: LCR Carrier Table

Input Data
0-16
Max 16 digits
(0-9, , #, P, @)

P = Pause
@ = Change to DTMF or wait
for Connect
0-10
(0= No Authorisation code)
0- Not Used
1- Used
Program 26 : ARS Service & Least Cost Routing
UNIVERGE SV8100
1 ~ 25
Default
0
No setting
0
0