NEC Univerge SV8100 Programming Manual page 215

UNIVERGE SV8100
Item
No.
18
19
20
21
22
Programming Manual
Item
Power-Saving Mode
CTA Data Communication Mode
Select 0 if the dip switch settings
on the CTA Adapter are set to PC
connection (1=on, 2~8=off) or
select 1 if the DIP switches are set
to printer connection (1~2=on,
3~8=off).
Baud Rate for CTA Port
Select the baud rate used by the
CTA Adapter.
Virtual Extension Access Mode
(when idle Virtual Extension key
pressed)
Determine whether a Virtual
Extension (VE) should function as
a DSS key or a Virtual Extension.
When DSS (0) is selected, the key
functions as a DSS key to the
extension and for incoming calls to
that extension. When Outgoing (1)
is selected, the key functions as a
virtual extension and can be used
for incoming and outgoing calls.
When Ignore (2) is selected, the
key functions can receive incoming
calls only.
Multiple Incoming From
Intercom and Trunk
If enabled, this affects how a
Hotline key lights, based on the
setting in Program 22-01-01. If
22-01-01 is set to 1 for trunk
priority, the Hotline key lights solid
when a trunk call rings in. If
22-01-01 is set to 0 for intercom
priority, the Hotline key does not
light for incoming trunk calls, but
lights solid for intercom calls.
If 15-02-22 is disabled, Hotline
keys light solid for any incoming
calls regardless of the setting in
Program 22-01-01.
Input Data
0 = Normal mode
1 = Power-Saving Mode
(Eco-Mode)
0 = CTI Mode
1 = Non Procedural Mode
(Non-SCS)
0 = 4800
1 = 9600
2 = 19200
0 = DSS
1 = Outgoing (OTG)
2 = Ignore
0 = Disable
1 = Enable
Issue 10.1
Related
Default
Program
1 20-02-10
0 15-02-20
2 15-02-19
2
1 22-01-01
2 - 179