Copy Program By Port Number - NEC Univerge SV8100 Programming Manual

Issue 10.1
Level:
IN
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 92-03 : Copy Program by Port Number to copy extension and the
data of each outside line.
Input Data
Item
No.
Feature Cross Reference
None
2 - 934

92-03 : Copy Program by Port Number

Program Number
01
Source Number
Enter the port number from where the data is
to be copied.
02
Destination Number (From)
Enter the first port number to where the
information is to be copied
03
Destination Number (To)
Enter the last port number to where the
information is to be copied. If the information
is to be copied only to one port, enter the
information entered in the Destination
Number (From) entry.
Conditions
None
Program 92 : Copy Program
Item
UNIVERGE SV8100
XX-XX
Input Data
For Trunk Base:

Trunk Port Number 1~200
For Trunk Group Base:

Trunk Group Number 1~100
For Extension Base:

Extension Number 1~512 (Extension
Include 768)
For Department Group Base:

Department Group Number 1~64
For DSS: (DSS Console Number 1~32

Program 92 : Copy Program