90-03: Save Data - NEC Univerge SV8100 Programming Manual

Issue 10.1
Level:
SA
Description
(This program is available only via telephone programming and not through PC
Programming).
Use
This program should be used after changing the programmed data.
Input Data
Item
No.
Feature Cross Reference
None
2 - 860
Program 90 : Maintenance Program
Program 90-03: Save Data
Item
01
Save Data
Conditions
When reloading a customer database, the system must be reset (either using

Program 90-08 or power down/power up) before all uploaded programming takes
affect.
to save the programmed data on the USB Flash Drive.
Input Data
Dial 1 + press Transfer (Press Transfer to cancel.)
Program 90 : Maintenance Program
UNIVERGE SV8100

90-03: Save Data