Dial Analysis Table For Ars/Lcr - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Program 26 : ARS Service & Least Cost Routing
Level:
IN
Description
Use Program 26-02 : Dial Analysis Table for ARS/LCR to set pre-transaction tables
for selecting Automatic Route Selection (ARS).


Input Data
Item
No.
01
02
03
Programming Manual

26-02 : Dial Analysis Table for ARS/LCR

Service Type 1 (Route to Trunk Group Number) – The number routes to a trunk
group.
Service Type 2 (F-Route Selected) – The number is controlled by the F-Route table.
Dial Analysis Table Number
Item
Dial Digits (16 digits maximum)
Dial
1~9, 0,
0 = No Service (None)
ARS Service
Type
1 = Route to Trunk Group
2 = Select F-Route Access
If Service Type 1 (in 26-02): Select Trunk
Additional
Data / Service
Group Number
Number
0~100 (Trunk Group No.0= No Route)
101~150 (Networking ID) (OT)
If Service Type 2 (in 26-02-02):
F-Route Time Schedule Not Used = 0~500
(F-Route Table Number).
Refer to
F-Route Time Schedule Used = 0~500
(F-Route Selection Number).
Refer to
Input Data
, #, or for wild character (Press line

key 1)
Program 44-05: ARS/F-Route Table
on page 2-537.
Program 44-04: ARS/F-Route
Selection for Time Schedule on page
2-536.
Issue 10.1
1~800
Related
Default
PRG
No
Setting
0
0 44-04
44-05
2 - 407