NEC Univerge SV8100 Programming Manual page 829

UNIVERGE SV8100
Input Data
Item
No.
Programming Manual
Item
37
G.722 Jitter Buffer - Maximum
Set the maximum G.722 Jitter Buffer.
38
G.726 Audio Frame
Maximum number of G.726 Audio
Frames. G.726 assumes the audio
signal made by a specimen by 16kHz
and the frame of 10ms is assumed to
be a unit to 32kbps by the encoding
compressed method.
39
G.726 Silence Compression Mode
Select whether to compress silence
with G.726. When there is silence, the
RTP packet is not sent.
40
G.726 Jitter Buffer - Minimum
Set the minimum value of the Jitter
Buffer of G.726 is set. Jitter is the
variation in the time between packets
arriving and the buffer allows this
variation to be absorbed.
41
G.726 Jitter Buffer - Standard
Set the average G.726 Jitter Buffer.
42
G.726 Jitter Buffer - Maximum
Set the maximum G.726 Jitter Buffer.
43
iLBC Audio Frame
Maximum number of iLBC Audio
Frames. iLBC assumes the frame of
10ms is a unit.
44
iLBC Silence Compression Mode
Select whether to compress silence
with iLBC. When there is silence, the
RTP packet is not sent.
Not used by IPLB.
45
iLBC Jitter Buffer - Minimum
Set the minimum value of the Jitter
Buffer of iLBC is set. Jitter is the
variation in the time between packets
arriving and the buffer allows this
variation to be absorbed.
46
iLBC Jitter Buffer - Standard
Set the average iLBC Jitter Buffer.
47
iLBC Jitter Buffer - Maximum
Set the maximum iLBC Jitter Buffer.
Input Data
0~255ms (Note 2)
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
0 = Disable
1 = Enable
0~255ms (Note 2)
0~255ms (Note 2)
0~255ms (Note 2)
2 = 20 ms
3 = 30 ms
4 = 40 ms
0 = Disable
1 = Enable
0~255ms (Note 2)
0~255ms (Note 2)
0~255ms (Note 2)
Issue 10.1
Default
20
3
0
30
60
120
3
0
30
60
120
2 - 793