Dell 2135cn Service Manual page 126

Checking the ScanButton Manger
setting
Is the setting of [ScanButton Manager]
correct?
Checked by the following procedures.
Click the [Start] and then select the [All
programs], the [Dell Printers], the [Dell
MFP Color Laser Printer 2135cn] and
the [ScanButton Manager] in order.
Checking the software
Is the selecting of software correct?
Checked by the following procedures.
1) Select the [Dell MFP Laser 2135cn
scanner] in the [Scanners and
Cameras] of the [Printers and Other
Hardware] of the [Control Panel] and
then open the [Properties]. (click the
right button of the mouse or [Properties]
button)
2) Select the [Properties] and then
select the [Events] tab of the [Dell MFP
Laser 2135cn Scanner Properties]
screen.
For Windows XP/Vista/Server 2003
3) Check that the [Start this program]
displays the [2135cn MFP Scan Button
Manager] and the [Select an event] is
set correctly.
For Windows 2000
3) Check that the [2135cn MPF Scan
Button Manager] is checked and the
[Scanner events] is set correctly.
Retry the scanning. If the message
[Select the program to launch for this
action] appears on the PC monitor,
select the [2135cn MFP Scan button
Manager] within 30 seconds.
Version 1 2008.02.01
A
Yes
Yes
1 - 98
No
Set these items correctly.
Scan Form/Image Type/Resolution/
Paper size/Output Destination
NOTE: Check that the directory
specified for [Output Destination] really
exists.
No
Set the [Events] tab menu of the [Dell
MFP Laser 2135cn Scanner Property]
correctly.
Chapter 1 Troubleshooting