Dell 2135cn Service Manual page 552

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

Removal 27 HARN ASSY INTERLOCK (PL10.6.4)

1) Remove the Tray 1. (Removal 1)

2) Open the COVER ASSY FRONT (PL10.2.1).

Note: Cover the drum of the PHD unit to avoid exposure to light.

3) Remove the PHD Unit. (Removal 3)

Note: The FUSER part is very hot. Take added care not to get burned when performing the

service operation.

4) Remove the FUSER ASSY. (Removal 9)

5) Remove the COVER ASSY SIDE R. (Removal 10)

6) Remove the COVER ASSY SIDE L. (Removal 14)

7) Remove the COVER POLE OUT. (Removal 15)

8) Remove the COVER REAR. (Removal 17)

9) Remove the COVER TOP. (Removal 18)

10) Disengage the HARN ASSY

INTERLOCK (PL10.6.4) connector (P/J44)

on the PWBA LVPS (PL10.6.16), release

the harness of the HARN ASSY

INTERLOCK from the clamp.

11) Remove the three clamps on the

PLATE ASSY DUCT (PL10.6.1) that fix the

harness of the HARN ASSY INTERLOCK,

pull the harness of the HARN ASSY

INTERLOCK out from the hole of the

CHASSIS LVPS (PL10.6.13).

Chapters

Table of Contents