Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 33 HARN ASSY INTERLOCK (PL10.6.4)
1) Mate the hole of the switch with the boss
of the printer, secure the switch with the
one screw (silver, tap, 16mm).
2) Secure the harness of the HARN ASSY
INTERLOCK with the clamps.
3) Route the HARN ASSY INTERLOCK
through the hole of the CHASSIS LVPS ,
attach the three clamps that secure the
harness of the INTERLOCK SWITCH to
the PLATE ASSY DUCT.
3 - 209
Version
2008.02.01