Flows 72 Paper Jam 077-900 - Dell 2135cn Service Manual

Flows 72 Paper Jam 077-900

Do not load a sheet to the SSF while printing with the Paper Cassette as the media
source.
Otherwise, a Jam error occurs.
Checking for paper and foreign objects
Open the front cover and check for
paper and foreign objects. Remove any
paper or foreign objects from the
printer.
Does the error still occur when printing?
Yes
Checking the paper feeding
Was the paper fed from the SSF?
Yes
Checking the status of the paper
Check that SSF paper is placed
correctly. If it is not, reinsert the paper.
Does the error still occur when printing?
Yes
Checking the front cover latch and
FUSER ASSY after installation
After opening and closing the front
cover, reinstall the FUSER ASSY.
Warning: Do work only after the FUSER
unit has cooled to room temperature.
Does the error occur when printing?
Yes
Checking the Exit Sensor for operation
Does the number on the screen
increase by one, when the actuator of
the Exit Sensor in the FUSER ASSY is
operated?
Checked by [Digital Input]-[DI-3] of [IOT
Diag] in [Printer Diag] of diagnosis.
Warning: Start the operation after the
FUSER ASSY has cooled down.
Yes
END
Version 4 2008.12.22
No
END
No
Checking the paper guides and paper in
Tray 1
Check that the side and end guides are
No
adjusted correctly in the CASSETTE
ASSY 250. If incorrect, readjust the side
and end guides.
Does the error still occur when printing?
END
No
END
No
Replace the FUSER ASSY(Refer to
Removal 9/ Replacement 51.) and
initialize the Fuser Life counter.
(Refer to the Tech Sheet).
1 - 139
Chapter 1 Troubleshooting
No
Yes
END