Chapter 3 Removal and Replacement Procedures (RRPs)
6) Route the harness of the IIT ASSY SUB
through the hole of the frame, fix it with the
clamp
clamp, engage the connector (P/J1002) of
the PWBA CONT AIO.
7) Replace the clamp that secures the
harness of the ADF ASSY to the printer.
8) Route the harness of the ADF ASSY
through the hole of the frame, route it to
hook
the three hooks of the HOLDER FFC,
engage the connector (P/J1003) of the
PWBA CONT AIO.
3 - 142
Version
2008.03.31