Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 10 PWBA HVPS (PL10.7.1)
Note: Use the wrist strap to protect the PWB from the electrostatic.
1) Mate the notch and hole of the PWBA
HVPS with the tabs of the CHASSIS ASSY
HVPS, attach the PWBA HVPS.
2) Secure the PWBA HVPS to the
CHASSIS ASSY HVPS with the seven
screws (silver, with flange, 6mm).
3) Engage the connector (P/J161) of the
HARN ASSY HVPS to the PWBAHVPS,
route the HARN ASSY HVPS to the
EDGING SADDLE. Close the EDGING
SADDLE.
Go to the next replacement step:
Replacement 11 UPPER UNIT (Reference only)
3 - 159
Version
2008.02.01