Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 15 KIT SHAFT PIVOT (PL10.2.99)
Note: Described below is the replacement procedure common among the left and right sides of
the SHAFT PIVOTs (PL10.2.14).
1) Mate the flat face of the SHAFT PIVOT
with the hole of the COVER ASSY
FRONT, push the SHAFT PIVOT until the
hook is locked.
Go to the next replacement step:
Replacement 59 Tray 1 (PL10.3.1)
3 - 173
Version
2008.02.01