Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 29 KIT PWBA MCU (PL10.7.99)
Note: Use the wrist strap to protect the PWB from the electrostatic.
1) Mate the holes of the PWBA MCU with
the tabs of the printer, attach it.
2) Secure the PWBA MCU to the printer
with the six screws (silver, with flange,
6mm).
3) Engage all the connectors of the PWBA
MCU.
Go to the next replacement step:
Replacement 32 CHASSIS ASSY LVPS (Reference only)
3 - 203
Version
2008.02.01