Fip-1.P2 Blank Print (No Print) - Dell 2135cn Service Manual

FIP-1.P2 Blank print (No print)

Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking the error mode
1
Does the error occur only during copying?
Checking the original setting
2
Is the original placed correctly?
Checking the PWBA CONT AIO installation
Reseat the PWBA CONT AIO. (Removal 24/Replacement
3
36)
Does the error still occur when copying?
Checking after replacing the PWBA CONT AIO
Replace the PWBA CONT AIO. (Removal 24/Replacement
4
36)
Does the error still occur when copying?
Checking the blank print.
5 Print the contamination check page.
Is the image printed correctly?
Version 4 2008.12.22
Trouble substance
The entire paper is printed pure white.
Possible causative parts
- ROS ASSY (PL4.1.1)
- PHD UNIT (PL4.1.21)
- MOTOR ASSY DISP (Y/M/C/K) (PL5.1.3)
or FRAME ASSY MOT (PL5.1.2)
- TONER CARTRIDGE K (PL5.1.21)
- TONER CARTRIDGE C (PL5.1.22)
- TONER CARTRIDGE M (PL5.1.23)
- TONER CARTRIDGE Y (PL5.1.24)
- TRANSFER ASSY (PL6.1.7)
- DRIVE ASSY SUB (PL7.1.1)
- DRIVE ASSY MAIN (PL7.1.2)
- DRIVE ASSY PH (PL7.1.4)
- PWBA CONT AIO (PL10.6.6)
- PWBA ESS (PL10.7.7)
- IIT ASSY SUB (PL10.9.2)
Check
1 - 367
Chapter 1 Troubleshooting
Remedy
Yes
Go to step 2. Go to step 5.
Set the original
Go to step 3.
correctly.
Go to step 4. End of work.
Replace the IIT
ASSY SUB.
End of work.
(Removal 59/
Replacement 2)
Printing data form
is not suitable for
the printer, then
check the printing Go to step 6.
data which the
problem
generated.
No