Pcou Programming - Toshiba Strata DK40 Installation & Maintenance Manual

Exchange Line Interface Unit

PCOU Programming

Program 03: Specify Code 11 for each slot that will support a four-circuit PCOU.
Note
Program 10-1: Enables or disables line-to-line Conference and Direct Inward System Access
(DISA).
Program 15: Assigns DTMF/Dial Pulse dialling, DISA, and additional attributes to each line.
Automatic Release (AR) assignments only need to be made for loop start lines.
Program *15: Makes tenant assignments.
Program 16: Assigns lines to line groups.
Program 39: Assigns line access buttons to digital and electronic telephones.
Program 40: Assigns station access to lines (incoming and outgoing).
Program 41: Assigns station access to lines (outgoing only).
Program 42-0, 1~8: Assigns behind PBX operation to each line.
Programs 45 ~ 48: Defines Toll Restriction for any line.
Programs 50 ~ 56: Defines Least Cost Routing assignments.
Program 78: Assigns special ringing of lines: includes Night Ring Over Page, DISA, Remote
Maintenance via the Internal Maintenance Modem (IMDU), and Integrated Auto Attendant.
Programs 81 ~ 89:
Program 93: Assigns names to lines.
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
Program 03 can be skipped, and Program 91-1 or 91-9 can be run instead.
Assigns lines to ring selected stations.
Assigns Delayed Ringing to any line.
DK40 Universal Slot PCBs
3-17