Toshiba Strata DK40 Installation & Maintenance Manual page 252

Peripheral Installation
Programming Strata DK40 for Voice Mail
Program 92: Initialisation clears voice mail auto dial codes.
Program 03: Verifies that a K5RCU is installed on the DK40 KSU to enable the VM
device to send DTMF tones.
Program 04: Assigns station Intercom or Directory numbers [DN] to VM ports
(initialised numbers recommended).
Program 05: First digit of special codes &96 and &97 (initialised numbers
recommended).
Program *09: Sets DDI numbers to ring Groups. Program *09 is used in conjunction
with Programs 71-75 to assign DDI calls to ring VM Auto Attendant Ports.
Program 10-1: If the system is first set for voice, program the VM device to dial the
suffix "1" after station numbers.
Program 10-2: If LED 04 ON for set/cancel operation and LED 06 ON for the VM to
detect 80 millisecond tones. Also set DTMF Tone return or No DTMF return options
(LED 11 and 20).
Program 13: If the VM device is the message centre, set the lowest standard telephone
port in the Program 31 VM group as the message centre.
Program 31: Turn LEDs 04, and 15~20 ON, and LED 05, 06, 07 or 08 ON for the
KSTU3, RSTU or PSTU ports that are connected to the Toshiba Stratagy VM ports.
Turn LED 09 ON for VM Auto Attendant "Supervised Transfer" operation; turn LED
09 OFF for VM Auto Attendant "blind transfer" operation and/or VM two Exchange-
line tandem connection. Do not set these options for telephone station ports.
Note
Program 33: Sets the KSTU3, RSTU and PSTU ports that are connected to the VM
ports to a hunting sequence, starting with the lowest port hunting to the next highest
port, etc. The last hunt should be to a live operator.
Program 35: LEDs 01 and 02 must be ON for stations to receive the message waiting
indication (flashing LED) from a VM device. It is advisable to turn Busy Station
Transfer (LED 20) ON for all VM/Auto Attendant ports, and to turn Busy Station
Ringing (LED 19) ON for all stations that must never be detected as busy when called
by the VM/Auto Attendant port.
Program 36: Sets Fixed Call Forward to VM [DN] per customer requirements.
Program 37: Sets the transfer recall timer for the VM ports to 11~999 seconds minimum
to allow Call Forward-No Answer to work on VM transferred calls. Station users can
individually set CF-NA ring time from 8~60 seconds.
Program 39: Sets the VM-related buttons on the digital and electronic telephones that
will be used to communicate with the VM device.
Programs 71-75: Sets which VM ports will ring with the DDI number/group allocation
set up in Program *09.
Programs 81~89: Verifies that the ringing assignments to the VM devices are set per
customer requirements.
Programs 16, 40, 41, 45~48 and 50~56: Verifies that outgoing Exchange line access is
allowed on VM ports to allow the VM out dialling message notification feature to
operate.
6-48
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
A, D, and B Tones should be enabled only for VM devices that respond to these
tones.
Voice Mail Options
Strata DK40 I&M Manual Spring 1999