Figure 6-22 Smdr Printout Example Column/Field Definitions - Toshiba Strata DK40 Installation & Maintenance Manual

Peripheral Installation
Exchange Line Number (001 ~ 012).
A
Indicates a disconnected call.
B *
[PDN] of the Station (1~4 digits) 2 making/answering a call.
C
"ABAN" represents an unanswered incoming call
"MSS" represents an incoming DISA call
"DISA" represents an incoming call following External Call Forward.
D
Time of Day (HH:MM; hour and minute the call was released).
Call Duration (HH:MM;SS). If a '
E
time is actual talk time.
Exchange Line Incoming Ring Duration Before Answer (MM:SS). If the call
F
is outgoing this field will be empty.
Station to which the exchange line was transferred (1~4 digits).
G
H
Outgoing Telephone Number (1 ~ 26 digits)
Account Code (4~15 digits)
I
Outgoing Call answered indication. If the call is unanswered a space will be
J
inserted.
K
Incoming call CLI
L
Sub-Address dialled fo outgoing calls (1 ~ 20 digits)
M
Sub-Address received on incoming calls (1 ~ 20 digits)

Figure 6-22 SMDR Printout Example Column/Field Definitions

General Notes
1
Call Duration (incoming, outgoing, or transfer) must be 1 or 10 seconds (minimum) to generate
a call record printout. It can be set to 1.0 or 10 seconds using Program 60-2.
2
"MSS": designates a Direct Inward System Access (DISA) or External Call Forward CO call to
a station that is not answered; or, answered after 1 or 10 seconds per Program 60-2. The call will
register as a normal incoming call if answered before the threshold time (1.0 or 10 seconds
depending on Program 60-2). DISA calls always register 05~06 seconds ring before answer
duration time.
3
"MODM": designates a call to the IMDU, Remote Maintenance Modem.
4
Field column information is provided for SMDR output formatting purposes.
5
DK40 will send a Carriage Return (CR) and Line Feed (LF) ASCII symbol after each line of
data.
6
The call record data is ASCII-formatted, 8 bits; no parity, 1-stop bit.
7
Special dial printout: Tone = "T", Long pause = "L", Flash = "F", Pause = "P"
6-40
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
SMDR Printer/Call Accounting Device Options
' appears in column 79 (see J) then this
*
Field Number (1 ~ 3)
Field Number (4)
Field Number (5 ~ 8)
Field Number (10~14)
Field Number (16 ~ 23)
Field Number (25 ~ 29)
Field Number (31 ~ 34)
Field Number (36 ~ 61)
Field Number (63 ~ 77)
Field Number (79 ~ 79)
Field Number (81 ~ 96)
Field Number (98 ~ 117)
Field Number (119 ~ 138
Strata DK40 I&M Manual Spring 1999