Telephone Wall Mounting - Toshiba Strata DK40 Installation & Maintenance Manual

Telephone Installation

Telephone Wall Mounting

This section explains how to mount digital and electronic telephones to a wall or other
vertical surface. See the manufacturer's documentation for instructions on mounting standard
phones.
Notes
Digital telephones equipped with RPCI-DIs cannot be wall mounted.
Electronic and older digital telephones equipped with an HHEU1 can be wall mounted.
2000-series digital telephones with headsets can only be wall mounted with an HHEU2.
To mount digital and electronic telephones
Figure 5-1
1. Loosen the captive screws, and remove the telephone base
2. Using a suitable cutter, remove the handset hanger from the base.
3. Insert the handset hanger in the slot provided on the front of the phone
The hanger fits in the notch on the handset cradle
4. Rotate the telephone base 180 degrees and secure it to the telephone with its four captive
screws
5. Connect the phone to the wall modular connector with a cord approximately four inches
long (available at most telephone supply companies).
6. Route the cord into the hollow portion of the base.
7. Mount the phone on the wall mounting modular connector plate.
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
Handset Hanger
Removing the Telephone Base
(see Figure 5-3).
Plastic Tab
1478
(see Figure
Station Apparatus
5-1).
(see Figure 5-2).
5-5