Basic Call Control - Toshiba Strata DK40 Installation & Maintenance Manual

Basic Call Control

Basic Call Control
lineMakeCall
This function places a call on the specified line to the specified address. The application has
the option to specify an originating address on the specified line. The TSPI models the
addresses based upon the line type when Set-up was used to define the driver.
If the line is busy when a call attempt is made, the currently active call will be disconnected.
If no destination address is provided, a new call will be created and the line will transition to
the LINECALLSTATE_DIALTONE state. The lineDial function can be used at this point to
dial the destination address.
LINECALLPARAM (default)
dwBearerMode
dwMinRate
dwMaxRate
dwMediaMode
dwCallParamFlags
dwAddressMode
dwAddressID
DialParams
dwOrigAddressSize
dwOrigAddressOffset
dwDisplayableAddressSize
dwDisplayableAddressOffset
dwCalledPartySize
dwCalledPartyOffset
dwCommentSize
dwCommentOffset
dwUserUserInfoSize
dwUserUserInfoOffset
dwHighLevelCompSize
dwHighLevelCompOffset
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
Field Name Setting
LINEBEARERMODE_VOICE
0 (3.1kHz)
0
LINEMEDIAMODE_INTERACTIVEVOICE
0
LINEADDRESSMODE_ADDRESSID
anyavailable
0,0,0,0
0
0
0
0
0
0
Computer Telephony Integration
8-21