Detailed Setting For The Order; Fax Number Of This Equipment (Common Information); E-Mail Information Of This Equipment (Common Information); Output Of Setting List Of The Auto Supply Order - Toshiba e-STUDIO206L Service Manual

-

Detailed setting for the order

[ADMIN] > [SERVICE] > [SUPPLY ORDER SETUP] > [TONER ORDERING]
***** TONER ORDER
PART NUMBER
CONDITION
QUANTITY
AUTO ORDER
*1 The order is placed when the number of replacement reaches the number specified for the
CONDITION.
-

FAX number of this equipment (common information)

[ADMIN] > [FAX] > [TERMINAL ID]
ID NAME
FAX NUMBER
-

E-mail information of this equipment (common information)

[ADMIN] > [E-MAIL]
FROM ADDRESS
FROM NAME
*1 When sending an E-mail, validity of the address is checked. If the address is invalid, it is not
sent.

3. Output of setting list of the Auto Supply Order

1. Enter the Service Mode.
 P. 5-5 "5.2 Service UI"
2. Select "FAX LIST PRINT MODE" and then press [NEXT].
3. Select "SUPPLY ORDER LIST" and then press [PRINT].
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Order information (TONER)
Part number to be ordered
The number of conditions (*1)
The quantity to be ordered
ON/OFF setting of order for each part
ID name of this equipment
FAX number of this equipment
E-mail address of this equipment (*1)
E-mail user name of this equipment
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
10 - 3
REMOTE SERVICE
10