6.17.4
Saddle Stitch Skew Adjustment
Perform this adjustment when the folding position for saddle stitching is tilted.
(1)
Turn OFF the power of the equipment.
(2)
Open the cover, pull out the saddle stitch section, and then loosen the 2 screws.
(3)
Rotate the adjustment screw slightly.
(4)
Tighten the 2 screws, return the saddle stitch section, and then close the cover.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig.6-137
Fig.6-138
Fig.6-139
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
6 - 119
SETTING / ADJUSTMENT
6