Feed Roller - Toshiba e-STUDIO206L Service Manual

(4) Detach the cover, arbor and clutch spring
from the shaft, and then take off the
separation roller.
Notes:
In case of the e-STUDIO506/507, detach the
arbors and torque limiter from the shaft, and
then take off the separation roller.
4.9.7

Feed roller

(1) Take off the separation roller holder
( P. 4-65 "4.9.6 Separation roller").
(2) Remove the clip and take off the feed roller.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Cover
Clutch spring
Arbor
Separation roller
Fig. 4-186
Fig. 4-187
One-way clutch
Feed roller
Clip
Fig. 4-188
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 66
Shaft
Arbor