Paper Exit Section/Reverse Section - Toshiba e-STUDIO206L Service Manual

3.16 PAPER EXIT SECTION/REVERSE SECTION

3.16.1 General Description
For e-STUDIO206L/256/306 / 207L/257/307, a sheet of paper with the toner fused on is transported to
the inner tray or Automatic Duplexing Unit (ADU) by switchbacking. in the paper exit section.
For e-STUDIO356/456/506 / 357/457/507, a sheet of paper with the toner fused on is transported to the
inner tray, but the exit roller does not switchback.
For e-STUDIO356/456/506 / 357/457/507, the exit roller has the offset function and the paper position
is shifted apart from one another back and forth.
The reverse section is only installed for e-STUDIO356/456/506 / 357/457/507.
It is a path only for switchbacking to the ADU to enhance the high-speed printing.
The reverse section has the reverse gate which switches the transport path to the paper exit section or
the reverse section.
[ e-STUDIO206L/256/306 / 207L/257/307 ]
Differences between e-STUDIO206L/256/306 / 207L/257/307 and e-STUDIO356/456/506 / 357/457/
507
item
Reverse section
(Switchback mechanism)
Reverse motor
Reverse sensor
Reverse roller
Offset mechanism
Offset motor
Offset sensor
Offset gate
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
OUTLINE OF THE MACHINE
Reverse roller
Reverse section
Reverse sensor
Exit roller
Entrance guide
Paper exit
section
ADU entrance
sensor
Exit sensor
Fuser unit
Fig. 3-55
e-STUDIO206L/256/306 / 207L/257/307
Not installed
Not installed
3 - 76
ADU upper transport roller
[ e-STUDIO356/456/506 / 357/457/507 ]
e-STUDIO356/456/506 / 357/457/507
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Offset gate home
position sensor
Reverse gate
ADU entrance
sensor
Exit sensor
Installed
Installed