4.9.16
Registration guide
(1)
Take off the process unit.
( P. 4-88 "4.11.1 Process unit").
(2)
Take off the automatic duplexing unit.
P. 4-134 "4.15.1 Automatic Duplexing
Unit (ADU)"
(3)
Remove 1 screw and then take off the
registration guide by sliding it.
Notes:
When installing the registration guide, be
sure that the 2 films are attached at the
positions shown in the figure.
(4)
Disconnect 2 connectors.
4.9.17
Registration sensor (S22)
(1)
Take off the registration guide.
( P. 4-74 "4.9.16 Registration guide").
(2)
Take off the actuator.
(3)
Release 3 latches and then take off the
registration sensor.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Registration guide
Registration roller
Film
Actuator
Registration sensor
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 74
Fig. 4-208
Registration guide
Fig. 4-209
Fig. 4-210