Fuser Center / Fuser Front Thermostat (Thmo1/Thmo2) - Toshiba e-STUDIO206L Service Manual

4.13.7

Fuser center / Fuser front thermostat (THMO1/THMO2)

(1) Take off the fuser roller unit
( P. 4-112 "4.13.2 Fuser roller unit /
Pressure roller unit").
(2) Place the fuser roller unit [1] upside down.
(3) Remove 2 screws, and then take off the
harness cover [2].
Notes:
When installing the harness cover [2], make
sure that the harness is not caught.
(4) Remove 2 screws, and then take off the
fuser front thermostat [1].
Notes:
Do not loosen the 2 red screws fixing the
thermostat holder.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
[1]
[1]
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 118
[2]
Fig. 4-335
Fig. 4-336
Fig. 4-337