Stapling/Folding Position Adjustment In Saddle Stitch Unit - Toshiba e-STUDIO206L Service Manual

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO206L:

Table of Contents

Stapling/folding position adjustment in saddle stitch unit

Perform this adjustment when the saddle control PC board was replaced or the stapling/folding position

must be changed for some reason.

Prepare 2 types of booklet samples using the main unit and use them for adjustment accordingly.

Create 2 types of booklet samples (1 set each) using the main unit.

Number of sheet

Measure the stapling and folding positions of the samples, and then perform adjustment

accordingly.

For stapling and folding, paper on the stacker of the stacker unit is moved to an exclusive

mechanism for stapling or folding. Therefore adjustment must be performed individually for the

folding stopping position of the stacker and the stapling stopping position.

*Check the folding position at the centerfold page of the sample.

* Check the stapling position at the centerfold page of the sample.

Table of Contents