Toshiba e-STUDIO206L Service Manual page 451

[B] Adjustment
If the pins cannot be fitted into the holes, perform the adjustment according to the following procedure.
(1) Remove the right-hand hinge screw at the
rear side.
(2) Loosen the left-hand hinge screw at the rear
side.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
MR-3021/3022
Fig.6-71
MR-3028
Fig.6-72
Fig.6-73
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
6 - 71
SETTING / ADJUSTMENT
6