Upper Rear Cover; Inner Tray; Left Rear Cover - Toshiba e-STUDIO206L Service Manual

4.1.7

Upper rear cover

(1) Take off the RADF or original cover.
(2) Take off the left upper cover
( P. 4-2 "4.1.4 Left upper cover").
(3) Take off the right upper cover.
( P. 4-3 "4.1.5 Right upper cover").
(4) Take off the rear cover.
( P. 4-3 "4.1.6 Rear cover").
(5) Remove 2 screws and take off the upper rear
cover.
4.1.8

Left rear cover

(1) Remove 1 screw and then take off the left
rear cover by releasing 2 hooks.
Remarks:
When installing the left rear cover, hang the 2
hooks of the left rear cover on the frame of
the equipment, and then fix it with 1 screw.
4.1.9

Inner tray

(1) Open the front cover and then take off the
toner cartridge.
(2) Remove 2 tap-tight screws, and then take off
the inner tray.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Upper rear cover
Left rear
cover
Inner tray
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 4
Fig. 4-10
Fig. 4-11
Fig. 4-12