Pickup Roller - Toshiba e-STUDIO206L Service Manual

4.9.8

Pickup roller

(1) Take off the drawer feeding unit
( P. 4-63 "4.9.2 Drawer feeding unit").
(2) Press the pickup roller and lift the rear pickup
arm.
(3) Slide the pickup roller assembly to the rear
side, and take off the front shaft from the
pickup arm.
(4) Take off the timing belt and then the pickup
roller assembly.
(5) Remove the pulley, one-way clutch and 3 E-
rings. Then take off the pickup roller.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Pickup arm
Fig. 4-189
E-ring
Pickup roller
Fig. 4-190
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 67
Pickup roller assembly
Timing belt
One-way clutch
Pulley
E-ring
DISASSEMBLY AND REPLACEMENT
4