(7)
Wire the harness and connect the connector.
(8)
Install the original glass with 2 screws.
Notes:
•
Make sure that the RADF original glass
[2] is securely inserted into the groove of
the fixing part of the original glass [1].
•
Securely insert the 2 pins of the original
glass [1] into the holes in the frame.
(9)
Install the right upper cover [1] with 2 screws.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-516
[2]
Fig. 4-517
Fig. 4-518
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 181
[1]
[1]
DISASSEMBLY AND REPLACEMENT
4