4.9.13
Bypass separation pad
(1)
Take off the bypass feed unit
( P. 4-71 "4.9.12 Bypass feed unit").
(2)
Remove 1 clip and then slide the bypass
feed roller.
(3)
Take off the bypass separation pad (arm).
4.9.14
Bypass feed roller
(1)
Take off the bypass feed unit
( P. 4-71 "4.9.12 Bypass feed unit").
(2)
Remove 1 clip.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Bypass separation pad
/Bypass feed clutch (CLT3)
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 72
Clip
Arm
Bypass feed roller
Fig. 4-202
Fig. 4-203
Clip
Fig. 4-204