Transport Roller - Toshiba e-STUDIO206L Service Manual

4.9.20

Transport roller

(1) Take off the right front cover.
 P. 4-7 "4.1.14 Right front cover"
(2) Take off the high-speed clutch.
( P. 4-80 "4.9.28 Hi-speed clutch (CLT6) /
Low-speed clutch(CLT7)").
(3) Take off the feed cover.
( P. 4-75 "4.9.19 Feed cover").
(4) Remove 2 screws and then take off the stay.
(5) Remove 1 screw and then slide the paper
guide B to the rear side.
(6) Disconnect 2 connectors and then take off
the paper guide B.
(7) Remove 2 screws and take off the holder.
(8) Remove 1 clip, 1 E-ring, and then take off the
transport roller.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Fig. 4-214
Paper guide B
Fig. 4-215
Clip
Bushing
Fig. 4-216
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 76
Stay
Holder
Transport roller
E-ring
Bushing