Replace parts
Saddle control PC board
[CBA0] Front saddle stapler home position error
MJ-1106/1108
Classification
Finisher related service call
Check item
Front saddle stapler clinch unit
Saddle control PC board (SDL)
Replace parts
Front saddle stapler clinch unit
Saddle control PC board
[CBB0]Rear saddle stapler home position error
MJ-1106/1108
Classification
Finisher related service call
Check item
Rear saddle stapler clinch unit
Saddle control PC board (SDL)
Replace parts
Rear saddle stapler clinch unit
Saddle control PC board
[CBC0] Saddle Stitch Finisher side alignment motor (M15) abnormality
MJ-1106/1108
* You receive a [CBC0] error when the [EF15] error occurs three times in succession.
Classification
Finisher related service call
Check Item
Saddle Unit
Side alignment motor (M15)
Saddle control PC board (SDL)
Replacement part
Side alignment motor (M15)
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
The stapler home position detection is abnormally operated and
finished
Harness check
•
Connector check (CN6)
•
Board check
Harness check
•
Connector check (CN7)
•
Board check
If there is mechanical problem when the jog is moved, fix the
mechanism.
Harness check
•
Connector check (CN7)
•
Board check
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
8 - 173
Remarks
Error item
Measures
Remarks
Error item
Measures
Remarks
Contents
Measure
Measure
ERROR CODE AND TROUBLESHOOTING
8