5.2
Service UI
5.2.1
Overview
The following self-diagnostic modes can be used with Service UI on the touch panel of the control
panel.
•
04 TEST PRINT MODE
•
05 ADJUSTMENT MODE
•
08 SETTING MODE
•
6S PM SUPPORT MODE
•
9S LIST PRINT MODE
•
FAX LIST PRINT MODE
Notes:
Not all codes of the self-diagnostic mode can be used with Service UI. Refer to chapter 15 for the
codes available with Service UI.
5.2.2
Login procedure
[ 1 ] In the normal mode
(1)
Turn the power ON.
(2)
Press the [USER FUNCTIONS] button.
(3)
With the [USER FUNCTIONS] menu displayed, enter the Service Mode password provided
during product training.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig.5-2
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
5 - 5
SELF-DIAGNOSIS MODES
5