4.6.5
Lens unit / CCD driving PC board
(1)
Disconnect 1 connector, remove 1 screw and
then take off the automatic original detection
sensor bracket [1].
(2)
Disconnect 1 connector [2].
(3)
Remove 4 screws and take off the lens unit
[3].
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-135
Fig. 4-136
Fig. 4-137
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 47
DISASSEMBLY AND REPLACEMENT
4