Alarm Setup
Alarm Setup
In the Alarm Limits Task Window you are able to review all of the alarm
limits that have been set for a patient. In this Task Window you are able
to turn off individual parameter alarms and adjust the limits. This means
that if you just want to adjust an alarm limit you do not have to get into
the individual parameter setups.
Getting into
Press the hardkey
the Alarms
Selection
Window
The first two softkeys
function in the Selection Window. If you select one of these softkeys, its
function is performed and you are returned to the Standard Display.
(Remember, you can also suspend the alarms and switch them back on
by using the
5-12
Alarm Functions
Alarms/Volume
Suspend Alarms
hardkey.)
Suspend
or
.
Alarms
SwitchOn Alarms
and