Adjusting Screen Contrast - Philips V24CT User's Reference Manual

Adjusting
V24 and V26:
Screen
The brightness or contrast of the screen display can be adjusted by using
Contrast
the dial located behind the edge of the display, on the lower right side of
the monitor. The V24 uses a contrast control. V24C, V24CT, V26C and
V26CT are equipped with a brightness control. Make sure that all of the
screen information is visible.
CMS:
The brightness and contrast of the screen display can be adjusted by
means of the two dials underneath the hardkeys.
Follow this procedure to achieve the optimum screen display:
1. Turn the brightness and contrast controls to their maximum
settings.
2. Slowly turn the brightness and contrast controls down to the lowest
acceptable position where the display can still be seen clearly. The
most acceptable position will be dependent upon the surrounding
light conditions. Please ensure that all the screen information is
visible.
Attaching the Patient
Screen Brightness Control
(Model V24C, V26C
V24CT, V26CT)
Screen Contrast Control
(Model V24)
Getting Started 2-7