What To Do If Your Report Does Not Print - Philips V24CT User's Reference Manual

Printing Reports
What to Do
During normal report printing, messages appear in the status message
If Your
area of the display. However, sometimes a printing status message may
Report Does
alert you to a problem that needs to be corrected. The following
Not Print
information describes printing messages that may appear, what they
mean, and what you may need to do to correct a problem (should there
be one).
MESSAGE: Printer Malfunction
MESSAGE: Report On Printer Has Been Canceled
MESSAGE: No Printer Available
MESSAGE: Report Complete
MESSAGE: Report In Progress
8-30 Trends and Calculations
Meaning: While printing a report, the monitor detected a problem
with the printer.
What You Need to Do:
turned on, and has paper loaded. If you are using a printer at the
central station, be sure the central station is operating. If these do
not correct the problem, call your Philips service representative.
The report sent to the printer has been stopped because
Meaning:
someone has pressed the Cancel Report.
What You Need to Do:
Meaning: A report cannot be started on this printer.
What You Need to Do:
turned on, and has paper loaded. If you are using a printer at the
central station, be sure the central station is operating. If these do
not correct the problem, call your Philips service representative.
A requested report has been printed.
Meaning:
What You Need to Do:
A requested report is being printed on a printer.
Meaning:
What You Need to Do:
Check the printer to be sure it is plugged in,
You don't need to do anything.
Check the printer to be sure it is plugged in,
You don't need to do anything.
You don't need to do anything.