Panasonic KX-NS1000 Feature Manual page 132

6.1.9 Extension Feature Clear
Features
Absent Message
BGM
FWD /DND
*1 *1
Call Pickup Deny
Call Waiting
*1
Data Line Security
Executive Busy Override Deny
Log-in/Log-out
Message Waiting
Paging Deny
Hot Line
*1
Timed Reminder
*1 These features can be programmed to not be canceled by Extension Feature Clear.
This feature is also known as Station Program Clear.
Conditions
•
Extension Dial Lock (® 6.1.8 Extension Dial Lock) and the extension personal identification number (PIN)
(® 6.1.10 Extension PIN (Personal Identification Number)) will not be cleared by this feature.
•
If dial tone 2 is heard after Extension Feature Clear:
After performing Extension Feature Clear, Call Waiting will be enabled if "Extension Clear: Call
Waiting" is set to "Clear" through system programming. In this case, dial tone 2 will be heard when
going off-hook. (® 5.1.5 Dial Tone)
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
10.9 PBX Configuration—[2-9] System—System Options—Option 2
→ Extension Clear—Call Waiting
→ Extension Clear—Fwd/DND
→ Extension Clear—Hot Line (Pick-up Dial)
Operating Manual References
1.3.26 Extension Feature Clear
132 Feature Manual
After Setting
Off
Off
Off
Allow
Enable (Call Waiting tone)
Off
Allow
Log-in
All messages left by other extensions will be
cleared.
Allow
Off
Cleared
Extension Feature Clear
Document Version 2016-03